

Free Baseball Cap Rack Plans
Bedroom Furniture PlansIndoor PlansSimple Wood Plans March 23, 2015 Jeffery 0

This is a project for the woodworking rookie. This free plan for a baseball cap rack is great piece for the enthusiast of the national pastime. It holds up to eight baseball caps and looks fantastic.
It is recommended to either use pine or maple for the wood. Here is the list of materials you will need to collect:
- Post: 1 x 4 at Five-Foot (4)
- Base: ¾” x 36” x 36” Veneered Plywood (Match Veneer to Wood Chosen)
- Tenon: 1-1/2” Diameter x 6” Dowel
- Baseball Dowel: ½” Diameter x 2” Dowel
- One Regulation-Size Baseball
- 1-5/8” Drywall Screws (4)
- 1-1/4” Drywall Screws (4)
- Shaker-Style Pegs 3-1/2” Long (8)
The tools required are as follows:
- Combination or Try Square
- Assorted Files
- 1” Paddle Bit
- ½” Drill Bit
- Phillips-Head Screwdriver
- Handsaws
- Hammer and Nail Set
- Block Plane
- Hand Screw Clamp
- Bar Clamps
- Mallet
- Drill Press
- Portable Drill
- Table Saw with Dado Cutter Set
- Band Saw
- Jointer
- Stationary and Portable Belt Sanders
- Random-Orbit Sander
- Pencil
- Tape Measure
- Carpenter’s Glue
- 120, 150, and 220-Grit Sandpaper
- Clean, Lint-Free Cloths
- Respirator
- Gloves for Finishing
- Paint Brush
- Your Choice Wood Stain
Click the link below to hit a home run with this project.
- Easy plan for any level
- Great to build with a child
- Easy to adapt to other sports
No comments so far.
Be first to leave comment below.