This is a project for the wood turner. It is both beautiful in design and function. Use these free plans to make a salt and pepper mill that is beautiful as it is functional.
Well detailed diagrams accompany this plan. There are plenty of pictures to reference throughout the process of this project.
Tools used to make this project
- Lathe
- Homemade Recess Tool
- 5mm and 3mm Thin Parting Tools
- 12mm Beading/Parting Tool
- 5mm Fluted Parting Tool
- 12mm and 10mm Spindle Gouges
- 25mm Spindle Roughing Gouge
- 12mm and 25mm Skew Chisel
Sharp sawtooth bits were used with the lathe running at about 1,000rpm. Ash was used to make the example in the picture, but the choice of different woods could accent the design more.
This is a piece that could spice up some dinner conversation. Click the link below to start turning this project.
No comments so far.
Be first to leave comment below.