This cutting board boasts some very interesting and unique features. There is a magnet to keep cutlery close at hand, it breaks into two parts, and one side has a handle for easily moving ingredients from the prep to the cooking area. Use these free plans to make a cutting board that is a cut above the rest.
Here is your materials list:
- (1) 1 x 12 x 48-Inch Maple Board
- (2) Packages of Ceramic Magnets
- (2) Packages #8×1-1/4-Inch Flathead Wood Screws
- (6) Packages #8×1-1/4-Inch Flathead Brass Wood Screws
- Wood Glue
- Epoxy Glue
- #8×2-1/2-Inch Flathead Wood Screws
- #8×2-1/2-Inch Flathead Brass Wood Screws
- ½-Inch Clear Rubber Bumpers
- 3/8-Inch Wood Plug
- Butcher Block Oil
This is the tool list for this project:
- Table Saw with Combination Blade
- Drill and #8 Countersink Bit
- Tape Measure
- #2 Phillips Driver Bit
- Sanding Block and 120-, 220-, and 320-Grit Sandpaper
- Painter’s Rags
The plans include a printer-friendly build diagram and cut list easily downloaded with one click. Follow the link below to get started today.
No comments so far.
Be first to leave comment below.