This multifunctional cart can be a real asset at your next party or as a media stand. These free plans will get you going and after you are done you can decide the best way to use it.
Tools needed:
- Tape Measure
- Sander
- Drill
- Kreg Jig (Optional)
- Saw
- Miter Saw
Materials:
- (2) 1 x 2 Eight-Foot Long
- (1) 2 x 2 Ten-Foot Long
- (2) 2 x 2 Eight-Foot Long
- (2) 2 x 4 Eight-Foot Long
- (1) 2 x 4 Six-Foot Long
- (1) 1 x 12 Ten-Foot Long
- ½ Sheet ¾” Plywood at 4’ x 4’
- (2) ½” Wood Screws
- (1) ¼” Pocket Hole Screw
- (2) ½” Pocket Hole Screws
- (1) ¼” Finish Nail
- Wood Glue
- Wood Filler
- Sanding Supplies
- Finishing Supplies
Your Choice Hardware
- (2) Large Cart Wheels
- (2) 6” Castors
- (1) 16-18” Towel Rod
- (1) Bottle Opener
There are diagrams to help you along with the build to make sure it is done right. Click the link below to get started.
No comments so far.
Be first to leave comment below.