Make your front step stands-out with this cedar strip door mat. The free plans will have you building a door mat using the same principals used to build a deck. For a beginner it might be a good place to start to understand the basics of building a deck before jumping into such a large and time consuming project.
There are only a few materials you will need to collect:
- 2” x 6” Cedar Board- as straight and knot-free as possible
- ¾” Brass or Copper Nails
The tools list is equally as small:
- Circular Saw or Table Saw
- Hammer
- Measuring Tape
- Carpenter’s Square
Helpful pictures accompany the written steps along with a cut list and some tips. This one-hour gateway project will have you on your way to much bigger endeavors before you know it. Click the link below to get started on this project.
An easy project to get your spring started and to clear out some smaller cut offs from earlier projects
- Small scale
- Useful
- Low cost
- Possible use of scrap from other projects
No comments so far.
Be first to leave comment below.