Kentucky Chair Plans
The following chair is called a Kentucky Chair. I have to apologize to all of you Kentucky fans if you reached this page looking for a Kentucky (University of Kentucky) Chair.
This Kentucky chair is a cool design that is relatively simple to build and is a great outdoor chair or beach chair. The chair is lightweight and can fold for carrying and story. Very unique design.
Click on the image for plans to build your own Kentucky chair.
One of our readers completed his own Kentucky chairs from the plans above. Take a look at the great work from Doug, who used 10-24 threaded rod with nylon insert lock nuts to fasten the chairs together. According to Doug, the entire chair can be done with 2 three foot rods.
Thanks Doug! Great work.
14 Comments
Trackbacks for this post
-
[...] Full reference (Copyright acknowledge) This entry was posted in Chair Plans and tagged chair-plans, image, kentucky, plans, the-image, visits-today. Bookmark the permalink. ← Plumbing Melbourne | Picnic Table Designs – Do Not Ever Overlook … Unfinished Bunk Beds | Bunk Beds → [...]
I love the chair and have it assembled, but not sure if wire nuts are the way to secure the cables? Is there a better idea? Something that won’t ‘stick out’ and look so unfinished? Help.
I use 1/4″ all thread rods with washer and nut. you can take two of the connecting pieces and drill a recess hole and the nuts are hidden almost. makes a professional look.
Rob,
That is a tough one to determine. I would consider checking out some of the cable ends at your local hardware store and possibly at a store like Rockler.com. They might have something that works and gives you a clean look. There are also some nice fasteners (pricey) from the companies that do cable railings for decks. Since you don’t have an entire fence to string, the price might be acceptable to you.
Good luck. Feels free to send us a picture of your completed chair. We’ll add it to this post.
send to contact@woodworkcity.com
Thanks.
I have made quite a few of these chairs and I use 10-24 threaded rod to fasten them together with nylon insert lock nuts. Two 3 foot rods will do the whole thing
Doug,
Did the 10-24 threaded rod bend enough to accommodate the pinching at the front of the seat and the top of the back, as well as the widening at center of the chair? Would it be possible to send me a picture of your chair with a close-up of the nylon insert lock nuts? I am trying to build these with my student’s and the whole cable thing had me puzzled with how to finish off the ends. I was happy to find this post talking about doing a different way.
Sorry I dont have a close up picture of the locknut but if you do a search on the 10-24 nylon insert locknut it should show you a good pic of one. As for binding. I have no had no problem with it as long as the holes are a little bigger than the rod and are in line with each other and the rods are flexible enough to bend easily. I have found it easier to do the two wider sections of the chair first while they are straight, then simply snug them up a little, cut off the excess with a hacksaw and then do the top and bottom with the remaining pieces. If the holes are a little off center with each other it might bind a little but you can generally tap the rod through with gentle tapping with a hammer, just make sure you have a nut on the end when you tap as to not damage the threads. I plan to do a few more pretty soon so will try to take some work in progress pics when i do them if that would help.
Hi can you give me the lengths of the wood for cutting? thanks!
I used clothesline wire and threaded the ends with a die, then used the nylon insert lock nuts.
I am having a hard time picking a wood for this project. I do not have a table saw to rip 2X4s so I am limited to wood that is already similar dimensions. I found and purchased some redwood deck railing material that is about 1.5″X1.5″ but was then told by a friend that the redwood would tend to split when cut and drilled.
He did this project using cedar, but I cannot find that material in correct size???
Any ideas out there?
Erik,
Since you are lacking a table saw, you are a bit hamstrung. Have you tried the redwood? The properties of redwood are very similar that of cedar. In fact, I would prefer redwood since it lacks many of the large knots that cedar usually has.
If you have the right dimension in redwood, I would suggest you go ahead and give that a try. You might be surprised at how well it holds up. The strength in a chair like the Kentucky chair is in the number of smaller pieces that make the whole.
Good luck.
Just finished one ofe these with some minor modification. I used Rope in place of the wire, works great but you do need to know how to tie knots.
Donald,
Do you have pictures of your chair(s)? If so, forward them to woodwork@woodworkcity.com. As far as the knots, that will probably be trial and error. I would suggest you check out a site such as http://www.animatedknots.com/. They have a terrific site that should help you decide what you want to use.
Good luck.
WoodworkCity.com
is there a way to make this chair taller?