Comments on: Free picnic table woodworking plans

By: admin

admin — Tue, 03 May 2011 15:53:11 +0000

Not a problem Tim. Happy to help.

Tim Lewis — Mon, 02 May 2011 21:10:15 +0000

Thanks, I should have noticed that!

admin — Mon, 02 May 2011 16:18:22 +0000

Tim,

It appears that the 45 degree cut is dropped down so that the lower edge meets.

The 45 appears to start at about 1 1/2″ down (based on the 2×4 center brace . Hope that helps a bit.

Tim Lewis — Mon, 02 May 2011 15:36:45 +0000

Hello, the 2×4 cross brace at the top of the legs, is the 45* cut from the top of the board or do you drop down 2″ then cut 45*?
Thanks
Tim

» Picnic Shelter Plans at Woodwork City — Fri, 26 Jan 2007 16:54:32 +0000

[...] Don’t forget to include a picnic table or two when working on your project and ordering your material. [...]