Free picnic table woodworking plans – Classic Style
This is one of the most useful projects that anyone could build. A picnic table is a simple plan and can be used virtually anywhere. The material is inexpensive and it will be useful for you and your family for years to come.
This picnic table is made from 2×6 and 2×4 lumber that can be found at any home center.
Material List:
- Lumber List
- (6) 2″ x 6″ – 12′ (seat, the top and the legs)
- (1) 2″ x 6″ – 10′ (seat supports)
- (2) 2″ x 4″ – 10′ (table supports and braces)
- Hardware List
- (12) 3/8″ x 3 1/2″ Galvanized carriage bolts (or stainless steel)
- (12) 3/8″ flat washers (Galvanized or stainless steel)
- 1 Box 2 1/2″ Galvanized nails
The plan below is rather self explanatory. If you are having any trouble, please leave a comment and I will be happy to help.
Don’t forget, subscribe to our free plan feed.
5 Comments
Trackbacks for this post
-
[...] Don’t forget to include a picnic table or two when working on your project and ordering your material. [...]
Hello, the 2×4 cross brace at the top of the legs, is the 45* cut from the top of the board or do you drop down 2″ then cut 45*?
Thanks
Tim
Tim,
It appears that the 45 degree cut is dropped down so that the lower edge meets.
The 45 appears to start at about 1 1/2″ down (based on the 2×4 center brace . Hope that helps a bit.
http://www.WoodworkCity.com
Thanks, I should have noticed that!
Not a problem Tim. Happy to help.
http://www.WoodworkCity.com